PSCM FAQs
 (Last Update: 31-Dec-2009, PSCM FAQ0003)

PSCM FAQ0001 (see also CTRIO FAQ0046; EBC FAQ0047; ECOM FAQ0036; EDRV FAQ0009; ERM FAQ0030; EZ Ethernet FAQ0018; PBC FAQ0009; WinPLC FAQ0018; NetEdit FAQ0014)
07-Nov-2002
Q: What software tool do I use to upgrade/downgrade my Host Engineering hardware?
A: Refer to the following:

Host Hardware Part Number Firmware/Booter Upgrade Tool
CTRIO H0-CTRIO
H2-CTRIO
H4-CTRIO		 CTRIO Workbench
EBC
EBC100		 H2-EBC
H4-EBC
T1H-EBC		 NetEdit3
T1H-EBC100 NetEdit3 (v3.4 or higher)
H2-EBC100 NetEdit3 (v3.5 or higher)
ECOM
ECOM100		 H0-ECOM
H2-ECOM
H4-ECOM		 NetEdit3
H0-ECOM100
H2-ECOM100
H4-ECOM100		 NetEdit3 (v3.5 or higher)
EDRV EDRV NetEdit3
ERM H2-ERM
H4-ERM		 NetEdit3 or ERM Workbench
EZ Ethernet EZ Ethernet
EZ EtherPLUS		 EZ Touch
PBC H2-PBC NetEdit3
PSCM H0-PSCM
H2-PSCM
WinPLC WinPLC WinPLC Workbench

NOTE: All the firmware for the above products can be downloaded using NetEdit3's File --> Live Update... The firmware files are stored in c:\HAPTools\Images folder.

PSCM FAQ0002 (see also NetEdit FAQ0031)
10-Apr-2007
Q: How do I update the firmware or booter for my H0-PSCM module?
A: On the top of the H0-PSCM module there is an RS232C RJ12 serial port connector. It can be accessed by opening the little door for that slot in the DL05 or DL06. The port is identical to an RJ12 serial port on the DL PLCs. To perform the update:

  1. Connect your PC's COM port to the RJ12 of the H0-PSCM using the standard DL PLC serial cable.
  2. Start NetEdit.
  3. In NetEdit select, Network --> Protocol --> Serial --> (your PC's COM port). NetEdit will then display the H0-PSCM.
  4. Right-click on the H0-PSCM and select Update Firmware (or Update Booter).
  5. Choose the firmware or booter file from HAPTools\Images\H0-PSCM folder.

PSCM FAQ0003 (see also CTRIO FAQ0045; DirectSOFT FAQ0132; DL Plus FAQ0010; DNLoader FAQ0011; DS Data FAQ0102; EBC FAQ0083; ECOM FAQ0084; EDRV FAQ0084; ERM FAQ0058; EZ Ethernet FAQ0010; General FAQ0004; HA-TADP FAQ0008; Lookout Direct FAQ0015; NetEdit FAQ0037; PBC FAQ0014; SDK FAQ0022; SERIO FAQ0004; WinPLC FAQ0038)
31-Dec-2009
Q: What is the export classification of your products (e.g. ECCN)
A: None of our products have an ECCN. Automation Direct sells our products and they export EAR99 NLR (No License Required). ECCN is Export Controlled Classification Number and none of our products are controlled.