EZ-Ethernet  &  EZ-EtherPLUS
These adapter cards are no longer available.
This information remains on our web site for existing customers only.
Updated: 03/05/2012
Specification Firmware Documentation   FAQs
The EZ-Ethernet adapter provides 10Base-T Ethernet connectivity from your EZ-Touch panel to an H2-ECOM in a DL205 system or an H4-ECOM in a DL405 system. The EZ-Ethernet adapter can be configured to communicate with up to 10 separate ECOMs. These ECOMs can be on a local network, or on remote networks and accessed through a gateway, or any combination of the two.

The EZ-Ethernet adapter installs directly inside the EZ-Touch panel and gets it's power from the EZ-Touch panel. The EZ-EtherPLUS adapter does all the same things as the EZ-Ethernet adapter, and adds Modbus/TCP protocol.

Minimum Required Hardware

  • An EZ-Touch panel with a "-F" in the part number.

Minimum Required Software

  • Windows 98 / Me / NT4 / 2000 / XP
  • EZ-Touch Programming Software Version 2.2

Minimum Required Software & Firmware

  EZ-Ethernet (no longer available) EZ-EtherPLUS (no longer available)
Communications 10Base-T
Interface Port RJ-45
Cable Segment Length 100m (328 ft)
Network Protocols IPX, UDP/IP IPX, UDP/IP, Modbus/TCP
Operating Environment
(limited to panel specifications)
0 60 C (32 140 F)
30% to 95% humidity (non-condensing)
No corrosive gases permitted
Storage Environment
(limited to panel specifications)
-20 70 C (-4 158 F)
30% to 95% humidity (non-condensing)
No corrosive gases permitted
Manufacturer Host Automation Products, LLC
Firmware


EZ-Ethernet.Zip
Last Update   : 20 January 2005
File Size        : 255Kb
Version          : v1.3.4
View the EZ-Ethernet Revision History

This zip file contains the EZ-Ethernet firmware EZ-Ethernet Interface DLL. Extract these files into your EZ-Touch software folder - they will automatically be extracted to the correct subfolders.

 


EZ-EthernetPLUS.Zip
Last Update   : 14 March 2006
File Size        : 270Kb
Version          : v2.0.13
View the EZ-EthernetPLUS Revision History

This zip file contains the EZ-Ethernet Interface DLL and the EZ-EthernetPLUS firmware. Extract these files into your EZ-Touch software folder - they will automatically be extracted to the correct subfolders.

This firmware WILL NOT work in the original EZ-Ethernet adapter cards.
Attempting to use this firmware in an EZ-Ethernet adapter will cause it to stop functioning.

 

Documentation


Use these following links to view the user manuals for these products.
 

Product Advisories

  • None

NOTE: you will need the Adobe Acrobat Reader to view the files (available at Adobe Acrobat Free Reader ).